sp-cap/ polymer aluminum capacitors design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? ee20 ? w1 l + - + - p1 w2 w2 p4 h p2 p3 p1 cap. polarity bar (positive) w. v. code lot no. features low esl by structure of sp-cap 50% esl of current products super low-es r (4.5 m ) high temperature re? ow soldering applicable (peak : 260 c 10s, main heating : 230 c 40s) rohs directive compliant surface mo unt type series: l speci? cations category temp. range 40 c to +10 5 c rated w.v.range 2 v.dc nomi nal cap.range 330 f to 560 f capacitance tolerance 20 % (120 hz/+20 c) dc leakage cur rent i < 0.1 cv ( a) 2 minutes tan < 0.06 (120 hz/+20 c) surge voltag erated work ing voltage 1.25 (15 c to 35 c) endurance after applying rated workin g voltage for 1000 hours at 105 c 2 c, and then being stabilized at +20 c, capacitor sh all meet the following limits. capacitance change ?0% of in itial measured value tan < initial speci ed value dc leakage cur rent < initial speci ed value moisture resistance after storin g for 500 hours at 60 c, 90 % capacitance change of initial measurd val ue 2 v.dc +70, ?0 % tan < 200 % of initial speci ed value dc leakag e current < initial speci ed value series & size code rated w.v. (v.dc) capaci- tance ( 20 %) ( f) case size speci cation part number min. packaging q ty (pcs) l (mm) w (mm) h (mm) ? 1 ripple current (ar.m.s.) ? 2 esr (m max.) ? 3 re ow condition : 240 c ? 3 re ow condition : 260 c [prop osal] lx 2 330 7.3 4.3 1.9 3.5 6 ? EEFLX0D331R 3500 7.3 4.3 1.9 3.8 4.5 ? EEFLX0D331R4 3500 470 7.3 4.3 1.9 3.5 6 ? eeflx0d471r 3500 7.3 4.3 1.9 3.8 4.5 ? eeflx0d471r4 3500 560 7.3 4.3 1.9 3.5 6 ? eeflx0d561r 3500 7.3 4.3 1.9 3.8 4.5 ? eeflx0d561r4 3500 ? 1: ripple current (100 khz/ +20 to +105 ? ), ? 2: esr (100 khz/+20 ?) ? 3: please con? rm ee25 in detail of the mouting speci? cations. standard products l?.2 w1?.2 h?.2 w2?.1 p1?.3 p2?.1 p3?.2 p4?.2 7.3 4.3 1.9 2.4 1.3 1.1 0.7 1.4 (mm) marking di men sions in mm(not to scale) ? externals of ? gure are the reference. sep. 2010 00
|
